Assessment of airborne environmental bacteria and related factors in 25 underground railway stations in Seoul,Korea

This study assessed bacterial concentrations in indoor air at 25 underground railway stations in Seoul, Korea, and investigated various related factors including the presence of platform screen doors (PSD), depth of the station, year of construction, temperature, relative humidity, and number of passengers. A total of 72 aerosol samples were collected from all the stations. Concentrations of total airborne bacteria (TAB) ranged from not detected (ND) to 4997 CFU m^?3, with an overall geometric mean (GM) of 191 CFU m^?3. Airborne bacteria were detected at 23 stations (92%) and Gram-negative bacteria (GNB) were detected at two stations (8%). TAB concentrations of four stations (16%) exceeded 800 CFU m^?3, the Korea indoor bio-aerosol guideline. The results of the study showed that TAB concentrations at the stations without PSD showed higher TAB concentrations than those with PSD, though not at statistically significant levels. TAB concentrations of deeper stations revealed significantly higher levels than those of shallower stations. Based on this study, it is recommended that mitigation measures be applied to improve the indoor air quality (IAQ) of underground railway stations in Seoul, with focused attention on deeper stations.     

Degradation of ammonium dinitramide (ADN) in digested sewage sludge under strict anaerobic conditions

The biodegradation of one popular nitramine energetics, ammonium dinitramide (ADN) by mixture of denitrifying bacterial species was investigated. ADN was observed to be effectively mineralized in the anaerobic mixed culture. The initial ADN concentration of 250 mg/L was reduced to non‐detectable levels (> 99% removal efficiency) in 5 days of incubation under anaerobic conditions. Final products generated from anaerobic degradation of nitramine energetics by anaerobic metabolism were NH₄ ⁺, CH₄, and CO₂ that were released to the environment with the denitrifiers’ growth. In addition, it was found that the activity of denitrifiers was inhibited by high concentration of ammonia generated through the degradation reactions of energetic nitrites.     

Effects of carbon nanotube and biochar on bioavailability of Pb,Cu and Sb in multi-metal contaminated soil

This study examined the effects of carbon nanotube and biochar on the bioavailability of Pb, Cu and Sb in the shooting range soils for developing low-cost remediation technology. Commercially available multi-walled carbon nanotube (MWCNT) and biochar pyrolyzed from soybean stover at 300 °C (BC) at 0.5, 1 and 2.5% (w w^?1) were used to remediate the contaminated soil in an incubation experiment. Both DTPA (bioavailable) and TCLP (leaching) extraction procedures were used to compare the metal/loid availability and leaching by the amendments in soil. The addition of BC was more effective in immobilizing mobile Pb and Cu in the soil than that in MWCNT. The BC reduced the concentrations of Pb and Cu in the soil by 17.6 and 16.2%, respectively. However, both MWCNTs and BC increased Sb bioavailability by 1.4-fold and 1.6-fold, respectively, in DTPA extraction, compared to the control. The toxicity characteristic leaching procedure (TCLP) test showed that the leachability of Pb in the soil amended with 2.5% MWCNT was 1.3-fold higher than that the unamended soil, whereas the BC at 2.5% decreased the TCLP-extractable Pb by 19.2%. Precipitation and adsorption via electrostatic and π–π electron donor–acceptor interactions were postulated to be involved in the interactions of Pb and Cu with surfaces of the BC in the amended soils, whereas ion exchange mechanisms might be involved in the immobilization of Cu in the MWCNT-amended soils. The application of BC derived from soybean stover can be a low-cost technology for simultaneously immobilizing bioavailable Pb and Cu in the shooting range soils; however, neither of amendments was effective in Sb immobilization.     

Exposure assessment of particulate matter and blood chromium levels in people living near a cement plant

This study evaluates the effect of air pollution caused by cement plants on nearby residential areas and performs an exposure assessment of particulate matter (PM) and total Cr, Cr⁶⁺, Pb, and Al. Further, the blood Cr levels of residents exposed to PM released by cement plants are also assessed. Nine buildings (eight residential and one elementary school building) close to cement plants were selected for this study, which were located in Pyeongtaek port, in west of Gyeonggi Province, South Korea. A total of 51 suspended particulate samples were collected at a flow rate of 2.0 L/min. Total Cr was more widely detected in residents’ houses and elementary schools. PM levels were higher at distances of 4.1 and 4.8 km than those at closer distances of 2.7 km. This was due to the influence of wind direction. The estimated mean blood level of Cr for the study participants was 3.80 μg/L, which is higher than levels estimated by other studies on Cr blood levels. Therefore, cement plants could cause an increase in total Cr and blood Cr levels in residential areas, and more continuous monitoring is necessary to better understand their impacts.     

An evaluation approach using a HARA and FMEDA for the hardware SIL

Safety instrumented systems (SIS) are becoming increasingly complex, and form a growing proportion of programmable electronic parts. The IEC 61508 global standard was established to ensure the functional safety of SIS; however, it was expressed in highly macroscopic terms. The safety integrity level (SIL) is a criterion describing whether a component meets the safety requirements of a SIS. The safety requirements give a target SIL for the expected risks using hazard analysis and risk assessment (HARA). The SIL must correspond to the safety requirements. This study introduces an evaluation process for determining the hardware SIL through failure modes, effects, and diagnostic analysis (FMEDA). First, the components of the SIS subsystem are defined in terms of failure modes and effects, and then the failure rate and failure mechanism distribution are assigned to each component. The safety mode and detectability of each failure mode are determined for each component and, finally, the hardware SIL is evaluated. We perform a case study to evaluate the hardware SIL of the flame scanner system using HARA and FMEDA, where the safety requirement of the flame scanner was determined using the risk graph method. We verified that the hardware SIL of the flame scanner corresponded to the safety requirement.     

液相催化氧化净化低浓度SO2生产复肥研究

以氨气作为SO_2吸收辅助原料,在中性条件下,就Fe、Cu、Mn、Co四种有利作物生长的金属离子对SO_2水溶液的催化氧化特性做了研究,结果表明,当SO_2吸收效率≥85％时,可得到的(NH_4)_2SO_4母液浓度高达56(Wt％),母液浓缩结晶后得到三种复肥产品,产品成分符合作物使用要求.     

Mass Load-Based Pollution Management of the Han River and Its Tributaries, Korea

Spatio-temporal variations of biochemical oxygen demand (BOD) and total coliform (TC) in the Han River, Korea, were investigated in terms of concentration-based and mass loading-based approaches. Considering the river water quality criteria regulated by the Ministry of Environment in Korea, the tributaries linked to the mainstream of the Han River were found to be highly contaminated with respect to both BOD and TC and, in fact, most of the tributaries exceeded the maximum water quality criteria. To evaluate the pollution impact of tributaries on the mainstream, the monthly water quality monitoring data for six years (from 1995 to 2000) were collected from the Han River basin, and statistically analyzed using Pearson’s correlation coefficient. The results revealed that mass loading-based approach was superior to the concentration-based approach for effective Han River watershed management. Overall results supported that the mass loading-based approach associated with total maximum daily loads (TMDL) management would be a useful and suitable protocol in watershed management for improving the water quality of the Han River and protecting public health. Therefore, this study supporting TMDL management can be applicable to a wide array of contaminants and watershed settings in Korea.     

Measurement of flow speed in the channels of novel threadlike structures on the surfaces of mammalian organs

There have been several reports on novel threadlike structures (NTSs) on the surfaces of the internal organs of rats and rabbits since their first observation by Bonghan Kim in 1963. To confirm this novel circulatory function, it is necessary to observe the flow of liquid through the NTS as well as the structurally corroborating channels in the NTS. In this article, we report on the measurement of the flow speed of Alcian blue solution in the NTSs on the organ surfaces of rabbits, and we present electron microscopic images depicting the cribrous cross-section with channels. The speed was measured as 0.3 ± 0.1 mm/s, and the flow distance was up to 12 cm. The flow was unidirectional, and the phase contrast microscopic images showed that the NTSs were strongly stained with Alcian blue. The ultrastructure of the NTSs revealed by cryo-scanning electron microscopy and high-voltage electron microscopy showed that (1) there were cell-like bodies and globular clumps of matter inside the sinus of the channel with thin strands of segregated zones which is a microscopic evidence of the liquid flow, (2) the sinuses have wall structures surrounded with extracellular matrices of collagenous fibers, and (3) there exists a cribriform structure of sinuses. To understand the mechanism for the circulation, a quantitative analysis of the flow speed has been undertaken applying a simplified windkessel model. In this analysis, it was shown that the liquid flow through the NTSs could be due to peristaltic motion of the NTS itself. Baeckkyoung Sung and Min Su Kim contributed equally to this work.     

First-trimester screening for Down syndrome; the role of nasal bone assessment in the Korean population

Objectives The aim of this study was to evaluate the role of nasal bone assessment in first-trimester screening for Down syndrome (DS) in the Korean population. Methods From July 2004 to March 2006, we prospectively evaluated the fetal nasal bones at 11–14 weeks' gestation in the Korean population. Results A successful evaluation was possible in 6490 of 6787 fetuses (95.6%). Absent, hypoechoic, and short nasal bones were seen in 4 (26.7%), 4 (26.7%), and 1 (6.7%) of 15 fetuses with DS, respectively, whereas in 5 (0.1%), 11 (0.2%), and 246 (3.8%) of 6456 normal fetuses. The incidence of absent and hypoechoic nasal bone showed significant differences between normal fetuses and fetuses with DS (P < 0.0005, both). Screening for DS using an absent or hypoechoic nasal bone resulted in a sensitivity of 53.3%, a specificity of 99.8%, a positive likelihood ratio of 215.2, and a negative likelihood ratio of 0.5. Conclusion Our study showed that nasal bone abnormality at 11–14 weeks of gestation had a high association with DS in the Korean population. This suggests that nasal bone assessment can be used to supplement the current first-trimester screening for DS in the Korean population. Copyright © 2007 John Wiley & Sons, Ltd.     

Photocatalytic degradation of lignin using Pt/TiO2 as the catalyst

Photocatalytic degradation of lignin was studied with the use of catalysts TiO(2) and Pt/TiO(2). The influence of several experimental parameters, i.e. pH, catalyst dosage and illumination on lignin degradation was investigated. The results showed that application of UV irradiation alone has almost no effect on the reduction of dissolved organic carbon (DOC) and American Dye Manufacture Institute value (ADMI). However, the addition of TiO(2) and Pt/TiO(2) reduced the original DOC (251 mg l(-1)) by more than 40% within 30 min of treatment and the reaction can be simulated with pseudo-first order kinetics. Rapid degradation of lignin was observed in acidic solution using either TiO(2) or Pt/TiO(2) as the catalyst compared to high pH cases. The content of Pt in the Pt/TiO(2) catalyst is 1%. In addition, too much catalyst addition has not increased the DOC and ADMI reduction proportionally. The investigation also indicated that the photocatalytic degradation rates could be enhanced 1-6 times faster after doping TiO(2) with Pt in different pH cases. A modified Nernst type model was adopted to simulate the decoloring process using TiO(2) and Pt/TiO(2) based on the profiles of oxidation reduction potential during the photocatalytic reaction. The developed equation can be used to predict the color removal efficiency of lignin wastewater by the photocatalytic process.